1. MX(I) staple beam with conic foot and MX(I) beam without conic foot are two fixation methods for doctors to choose according to the situation.
2. The staple leg adopts is the barb structure, which provides a greater pullout force for the product to prevent the exit.
3. The front end of the staple leg adopts the tip design, and the implantation process is simple and easy to operate.

1. The anchor is made of polyetheretherketone (PEEK) material, and the surgical light has no metal artifacts.
2. Complete size and specifications to meet the needs of surgery.
3. MB(II) type is partially double threaded, and MB(IlI) type provides stronger fixation force for double threaded.
4. Preset one or two high-strength sutures.
5. The combination of pure white suture and blue and white suture is used to facilitate intraoperative suture and knot recognition.
6. The inserter screw rod has the insertion depth marker line, and the insertion process is clear.

1. PEEK materials can improve bone induction and antibacterial properties;
2. Compared to metal nails, peek has fewer cutting action on the transplant during inserting, less interference of metal residues on postoperative MR examination, and lower possibility of serious aseptic inflammatory reactions caused by metal left in the body for a long time;
3. Available in full size, JM/JQ;
4. The insertion depth lines are marked on the universal inserter rotating rod, making the insertion process clear at a glance.

1. Safety: The depth limit sleeve adjusts the depth to avoid damaging nervus vascularis, making it safer and more reliable
2. Minimally invasive: The fixed bar is in a small size, used in conjunction with 2-0 # ultra high strength suture to reduce damage to meniscus;
3. Convenience: 360° single-handed actively activated fixed bar, controlling the timing of inserting, making it more convenient;
4. Multiple options: Designed with 12° forward and reverse bends and straight angles, providing more options;
5. Comfort:  Based  on  the  ergonomic  principle, the  handle  surface  is  designed to  be  anti-slip,  making  it  more comfortable during operation

1.The disposable shaver grinders have multiple specifications and models, which can adapt to 90% products on the market;
2.The disposable shaver grinders are made of imported 455 stainless steel, which have higher strength;
3.After tested for many times, the roughness and circular runout can fully meet the requirements; 4.Three interfaces are in three colors for easy differentiation;
5.The snap joint can effectively prevent doctors from dropping the planer tool when using it.

1. Three-layer silicone pad closed design, new thread design to reduce liquid leakage caused by instrument in and out;
2. Provide better intra-articular stability and high transparency tube body material; 
3. Have a stitch management slot for better operation and experience;
4. Conform to ergonomic design principles.

1. Disposable Shaver Blades come in multiple specifications and models and can be adapted to 90% of products on the market.
2. The heads of Disposable Shaver Blades are made of imported 465 stainless steel, which has higher strength.
3. The buckle design can effectively prevent the doctor from falling off when using the shaver.

1. The anchor adopts a high-low double-thread design with the same structure as the metal anchor, which can provide better fixing strength than the metal anchor.
2. Combine and match with sutures of the same series to provide a variety of matching solutions according to the doctor's needs.
3. The anchor has excellent self-tapping performance and can be used to drill metal anchors without the need for pre-drilling holes.
4. The anchor uses an independent wire hole design to avoid the sutures from being entangled and knotted.

1.籃鉗系列採用455不銹鋼材料，強度更高，使用壽命更長；
2.採用獨特的榫卯無銷釘連接方式，避免了術中銷釘遺落的風險，安全性更高；
3.多個規格型號，能夠滿足各種手術使用需求；
4.採用特殊的熱處理工藝，在保證鋒利度的同時，使用壽命也得到了更大的提升；
5.PVD金鋼石真空鍍膜，使器械抗磨性與抗氧化性效果較為理想。

上翹結構設計更符合人體膝關節結構，在半月板縫合過程中減小對組織的傷害，充分發揮器械的使用性能。

1.將過線鉗槍芯安裝至過線槍上，將縫線穿至鉗頭；
2.將需要縫合的縫線穿至鉗頭凹槽處；
3.將縫合槍鉗頭深入體內，對準需要縫合的部位進行穿刺；
4.操縱手柄，控制鉗頭閉合，即可實現過線；
5.鬆開手柄將鉗子拔出，即可將線帶出；
6.重複以上操作。

肩袖縫合槍一步即可實現鏡下穿刺、引線、過線，使用高強度不銹鋼槍身保證了精度以及使用壽命，使用鎳鈦合金槍芯，保證了使用過程順滑以及槍芯的使用壽命。

1.將過線鉗槍芯安裝至過線槍上，將縫線穿至鉗頭；
2.將需要縫合的縫線穿至鉗頭凹槽處；
3.將縫合槍鉗頭深入體內，對準需要縫合的部位進行穿刺；
4.操縱手柄，控制鉗頭閉合，即可實現過線；
5.鬆開手柄將鉗子拔出，即可將線帶出；
6.重複以上操作。

1.產品種類齊全，有兩端設有開口的單一板，也有長度可調節的單獨線圈，還有板與線圈組合的可調節線圈長度的組合型號，適用於多種臨床場景 ；
2.組合的產品提供牽引線，幫助醫生間接拉動移植物進行調整 ；
3.產品無須翻袢線，減少使用步驟 ；
4.線圈能夠通過較小直徑的骨道，長度可調節，能夠適用於不同患者，且線圈端部適配各種型號的鈦板 ；
5.線圈或是帶有線圈的組合產品能夠使移植物較大程度的與骨接觸 ；
6.每種鈦板上都有凹槽，能夠使縫線和線結固定的同時不會造成明顯的凸起。

1.縫線由超高分子量聚乙烯紗線編織而成，組織反應極小，生物相容性好；
2.提供藍，白，白藍三種顏色選擇，便於手術操作時識別和縫線管理；
3.提供不同縫線和縫合針的多種規格組合，產品規格齊全，可滿足客戶的多種需求；
4.縫線表面光滑，條幹均勻，無結頭，不褪色 ，柔順，耐磨，打結性能優良且具有遠超標準要求的抗張強度；
5.縫合針採用醫用不銹鋼，材料優良，彈性韌性好，穿刺鋒利；針線連接流暢，銜接後針尾應光滑，且連接強度高。

1. Anchor nail tip design, easy implantation, no pre drilling requirements;
2. The anchor pin is designed with high and low double threads to provide greater holding force;
3. Preset one or two high-strength sutures;
4. The two sutures are made of pure white and white blue thread, which is convenient for knotting during operation:
5. Independent double hole design to reduce suture knotting and winding during operation:
6. Full size, including 20, 2.8 and 3.5,5.0 and 6.5 meet the needs from all positions of the body;
7. The insertion depth mark line is on the rotary rod of the inserter;
8. Choose radiopaque titanium materials;
9. The handle is made of medical ABS material.